Toyota RAV4: Scanning radio stations
■ Scanning the preset radio stations
1 Press and hold
until you hear a
beep.
Preset stations will be played for 5 seconds each.
2 When the desired station is reached, press
once
again.
■ Scanning all radio stations within range
1 Press
All stations with reception will be played for 5 seconds each.
2 When the desired station is reached, press
once
again.
Setting station presets
1 Search for desired stations by turning
or pressing “∧”
or “∨” on .
2 Press and hold the button (from
) until you
hear a beep. ...
Switching the display
Press .
If the text continues past the end of the display, “
” is displayed. Press
.
■Reception sensitivity
●Maintaining perfect radio reception at all times is difficult due to ...
See also:
Safety chains
Always use a suitable chain between your
vehicle and the trailer. The safety chains should
be crossed and should be attached to the hitch,
not to the vehicle bumper or axle. The safety
chains ...
Antenna location and effective range
■ Antenna location
1 Antennas outside the cabin
2 Antennas inside the cabin
3 Antenna outside the luggage
compartment ...
If your vehicle goes off the edge of the pavement
• If your vehicle goes off the edge of the pavement, slow down, but
avoid severe brake application, ease the vehicle back onto the
pavement only after reducing your speed. Do not turn the steering ...
