Mercedes-Benz GLK-Class: Restarting the tire pressure loss warning system
Restart the tire pressure loss warning system if you have:
- changed the tire pressure
- changed the wheels or tires
- mount new wheels or tires
- Before restarting, consult the Tire and Loading Information placard on the B-pillar on the driver's side or the tire pressure table on the inside of the fuel filler flap to ensure the tire pressure in all four tires is set correctly for the current operating conditions.
- Observe the notes in the section on tire pressures ().
WARNING
The tire pressure loss warning system can only give reliable warnings if you have set the correct tire pressure.
If an incorrect tire pressure is set, these incorrect values will be monitored.
A tire with insufficient pressure results in vehicle instability when driving, thus increasing the risk of an accident.
- Make sure that the SmartKey is in position 2 () in the ignition lock.
- Press the or button to select the Service menu.
- Press the or button to select Tire Pressure.
- Press the button. The Run Flat Indicator Active Press 'OK' to Restart message appears in the multifunction display.
If you wish to confirm the restart:
- Press the button. The Tire Pressure Now OK? message appears in the multifunction display.
- Press or to select Yes.
- Press the button. The Run Flat Indicator Restarted message appears in the multifunction display.
After a teach-in period, the tire pressure loss warning system will monitor the set tire pressures of all four tires.
If you wish to cancel the restart:
- Press the button.
or
- If the Tire Pressure Now OK? message appears, press or to select Cancel.
- Press the button. The tire pressure values stored at the last restart will continue to be monitored.
Important safety notes
While the vehicle is in motion, the tire pressure loss warning system monitors the set tire pressure using the rotational speed of the wheels. This enables the system to detect significant pressur ...See also:
If You Get Stuck
Avoid driving on soft sand, deep mud,
or other surfaces where you could
get stuck. If you do happen to get
stuck because of inclement weather
or other conditions, choose a safe
and appropria ...
Activating/deactivating the residual heat function
It is possible to make use of the residual heat of the engine to continue heating
the stationary vehicle for up to 30 minutes after the engine has been switched off.
The heating time depends on th ...
Taking a phone call and declining an incoming call
To take a phone call: Press the OFF
hook switch .
To put an incoming call on hold: Press
the ON hook switch briefly.
To decline an incoming call: Press the
ON hook switch for more than 1.5
...