Nissan Rogue: Replacing
Replace the wiper blades if they are worn.
1. Lift the wiper arm away from the windshield.
2. Push and hold the release tab A , and move the wiper blade down the wiper arm 1 .
3. Insert the new wiper blade onto the wiper arm until a click sounds.
4. Rotate the wiper blade so that the dimple is in the groove.
- After wiper blade replacement, return the wiper arm to its original position; otherwise it may be damaged when the hood is opened.
- Make sure the wiper blades contact the glass; otherwise the arm may be damaged from wind pressure.
Be careful not to clog the washer nozzle A .
This may cause improper windshield washer operation. If the nozzle is clogged, remove any objects with a needle or small pin B . Be careful not to damage the nozzle.
Cleaning
If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the wi ...Rear window wiper blade
Contact a NISSAN dealer if checking or replacement is required. ...See also:
Cup holders
Type A
Removing the adapters changes
the size.
Type B
To use the cup holders, pull the
strap forward and fold down the
center seatback.
■Adjusting size of the cup holders (type A on ...
Removing the key blade
Removing the key blade
1 Slide the spring loaded catch to the side.
2 Pull the key blade straight out of the remote
key. ...
XM Satellite Radio Service
XM is a satellite radio service based in the 48 contiguous United States and
10 Canadian provinces. XM Satellite Radio has a wide variety of programming and
commercial-free music, coast to coast, ...