Volvo XC60: Removing the headlight housing - Headlight housing - Replacing bulbs - Maintenance and specifications - Volvo XC60 Owner's ManualVolvo XC60: Removing the headlight housing

1. Switch off the ignition by briefly pressing

1. Switch off the ignition by briefly pressing the START/STOP ENGINE button.

2. Remove the remote key from the ignition slot1.

3. (Upper illustration under "Headlight housing").

    1 Withdraw the headlight housing's locking pins.

    2 Pull the headlight housing straight out.

CAUTION When disconnecting the connector, pull on the connector itself and not on the wiring.

4. (Lower illustration under "Headlight housing").

    1 Unplug the wiring connector by holding down the clip with your thumb.

    2 Pull out the connector with the other hand.

5. Lift out the housing and place it on a soft surface to avoid scratching the lens.

6. Replace the defective bulb(s).

    Headlight housing
    The entire headlight housing must be lifted out when replacing all front bulbs. CAUTION Never touch the glass of bulbs with your fingers. Grease and oils from your fingers vaporize in the he ...

    Reinserting the headlight housing
    When reinserting the housing, be sure that the long locking pin (to the left in the illustration) is securely in place in both of its retaining clamps. 1. Plug in the connector until it clicks ...

    See also:

    Using Automatic Mode
    Press the switch rearward and release it within one-half second and the Sky Sliderв„ў will open from the front and move automatically toward the rear of the vehicle. Press the switch forward and ...

    Fuel Additives
    To provide cleaner air, all gasolines in the United States are now required to contain additives that help prevent engine and fuel system deposits from forming, allowing the emission control syste ...

    Touch screen overview
    Note: Physical controls are referred to as hard keys. Virtual buttons on the touch screen are referred to as soft keys. Screen options will vary depending on vehicle specification and set-up. T ...