Volvo XC60: Putting ACC in standby mode
Before ACC can be used to regulate speed and/or the distance to a vehicle ahead, it must first be put in standby mode.
To do so:
Press .
The symbol appears in the display and parentheses (---) indicate that ACC is in standby mode.
NOTE
The driver's door must be closed and the
driver's seat belt must be fastened before
ACC can be put in active mode. If the driver's
seat belt is taken off or if the driver's
door is opened, ACC will return to standby
mode.
Operation
Controls and display 1 Resume previous settings, increase speed (each additional press increases speed by 1 mph (approximately 2 km/h). 2 Standby mode on/off 3 Set time interval 4 Put in activ ...Setting a speed
Once ACC has been put in standby mode, use the or buttons to store (set) the vehicle's current speed. This puts the system in active mode. The set speed, for example 55 mph, is shown in th ...See also:
Towing a vehicle with both axles on the ground
When having your vehicle towed, observe the important safety notes ().
WARNING
The power assistance for the steering and the brake force booster do not work
when the engine is not running. Yo ...
Service The Parksense Rear Park Assist System
When the ParkSense Rear Park Assist System is malfunctioning,
the instrument cluster will actuate a single
chime, once per ignition cycle, and it will display the
“SERVICE PARK ASSIST SYSTEM†...
Sensor care
When washing the vehicle do
not aim
high pressure water jets directly at the
sensors. Do not use abrasive materials
or hard/sharp objects to clean the
sensors. Only use approved vehicle
shampo ...