Jeep Liberty: Rearming Of The System - Vehicle Security Alarm — If Equipped - Things To Know Before Starting Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Rearming Of The System

If something triggers the Vehicle Security Alarm, and no action is taken to disarm it, the Vehicle Security Alarm will turn off the horn after three minutes, turn off all of the visual signals after 15 minutes, and then the Vehicle Security Alarm will rearm itself.

    Vehicle Security Alarm — If Equipped
    The Vehicle Security Alarm monitors the vehicle doors, liftgate, and liftgate flipper glass for unauthorized entry and ignition for unauthorized operation. While the Vehicle Security Alarm is ar ...

    To Arm The System
    1. Remove the key from the ignition switch and exit the vehicle. 2. Lock the doors and liftgate by pressing the power door LOCK switch or the LOCK button on the Remote Keyless Entry (RKE) trans ...

    See also:

    Starting Procedures
    Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. WARNING! • When leaving the vehicle, always remove the key fob from the ign ...

    StabiliTrak® System
    The StabiliTrak system assists with directional control of the vehicle in difficult driving conditions. The system is on when the vehicle is started. ○ To turn off both Traction Control and S ...

    Traction Control System (TCS)
    The traction control system limits wheel spin. The system is on when the vehicle is started. ○ To turn off traction control, press and release located on the console. illuminates and the ...