Subaru Forester: Position light - Replacing bulbs - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: Position light

1. Turn the bulb socket counterclockwise

1. Turn the bulb socket counterclockwise and pull out the socket.

2. Pull the bulb out of the socket.

3. Install a new bulb.

4. Install the bulb socket by turning it clockwise.

    High beam light bulbs
    Right-hand side 1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct (right-hand side). 2. Disconnect the electrical connector from the bulb. 3 ...

    Front turn signal light
    It may be difficult to replace the bulbs. Have the bulbs replaced by your SUBARU dealer if necessary. ...

    See also:

    Cargo Area Light
    The cargo area light has a threeposition switch. In the OFF position, the light does not come on. In the center position, it comes on when you open the tailgate. In the ON position, it s ...

    Anchorage location
    1) For right seat 2) For center seat 3) For left seat There is an anchorage located on the rear edge of the ceiling above each seating position. ...

    Tire inflation pressure
    Check the pressure of the tires (including the spare) often and always prior to long distance trips. The recommended tire pressure specifications are shown on the Tire and Loading Information ...