Subaru Forester: Photosensors
Photosensors
The mirror has a photosensor attached on both the front and back sides. During nighttime driving, these sensors detect distracting glare from vehicle headlights behind you and automatically dim the mirror to eliminate glare and preserve your vision. For this reason, use care not to cover the sensors with stickers, or other similar items. Periodically wipe the sensors clean using a piece of dry soft cotton cloth or an applicator.
Auto-dimming mirror/compass with HomeLink® (if equipped)
Auto-dimming mirror/compass with HomeLink® (if equipped) 1) HomeLink® button 1 2) HomeLink® button 2 3) LED 4) HomeLink® button 3 5) Sensor 6) Automatic dimming on/off button 7) C ...Compass zone adjustment
Compass calibration zones 1. Refer to the “Compass calibration zones” map shown above to verify that the compass zone setting is correct for your geographical location. 2. Press and ...See also:
Rear center seating position
The head restraint is not intended to
be used at the lowest position.
Before sitting on the seat, raise the
head restraint to an appropriate
position depending on your sitting
height.
...
Snow tires and cables
WARNING: Snow tires must be the same size, load index, speed
rating as those originally provided by Ford. Use of any tire or
wheel not recommended by Ford can affect the safety and
performance of ...
Rear view monitor system (vehicles with auto anti-glare inside rear view
mirror)
The rear view monitor system assists the driver by displaying an
image of the area behind the vehicle. The image is displayed in
reverse on the screen. This reversed image is a similar image to the
...