Mercedes-Benz GLK-Class: Important notes on the use of KEYLESSGO - KEYLESS-GO - SmartKey - Opening/closing - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Important notes on the use of KEYLESSGO

  • The KEYLESS-GO key can be used like a conventional key.
  • You can combine KEYLESS-GO functions with those of a conventional key, e.g. unlock with KEYLESS-GO and lock with the Always carry your KEYLESS-GO key on your person. button.
  • Always carry your KEYLESS-GO key on your person.
  • Do not keep the KEYLESS-GO key together with:
    • - electronic devices, e.g. a mobile phone or another key
    • - metallic objects, e.g. coins or metal foil.

    This can affect the functionality of KEYLESS-GO.

  • When locking and unlocking using KEYLESS-GO, the distance between the SmartKey and the corresponding door handle must not exceed 3 ft (1 m).
  • If the vehicle is parked for more than 72 hours, the KEYLESS-GO function is deactivated. Pull the outer door handle and switch on the ignition to reactivate the KEYLESS-GO function.
  • If the KEYLESS-GO key is removed from the vehicle, it is possible that the system may not recognize the SmartKey. The vehicle can then not be locked or started using KEYLESS-GO.
  • If the KEYLESS-GO key has been removed from the vehicle, e.g. if a passenger leaves the vehicle with a KEYLESS-GO key:
    • - if the start/stop button is pressed or if an attempt is made to lock the vehicle with the locking button on the outer door handle, the Key Not Detected message appears in the multifunction display
    • - when the engine is running, the red Key Not Detected message appears in the multifunction display as you pull away. Find the KEYLESS-GO key and change its position in the vehicle. Carry the KEYLESS-GO key in your shirt pocket, for example.
  • If you have started the engine with the Start/Stop button, you can switch it off again by: - pressing the Start/Stop button again
    - inserting the KEYLESS-GO key into the ignition lock if the vehicle is stationary and the automatic transmission is in park position P.
  • You could unlock the vehicle by mistake if the distance between the KEYLESS-GO key and the vehicle is less than 3 ft (1 m) and:
    - an exterior door handle is hit by a water
    jet
    or
    - you clean an exterior door handle.
  • Bear in mind that the engine can be started by any of the vehicle occupants if there is a KEYLESS-GO key in the vehicle.

  • To unlock the vehicle: touch the inner surface of the door handle.
  • To lock the vehicle: touch sensor surface 1.
  • Convenience closing feature: touch recessed sensor surface 2 for an extended period ().

If you pull on the handle of the tailgate, only the cargo compartment of the vehicle is unlocked.

    General notes
    USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must a ...

    Changing the settings of the locking system
    You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own. To ch ...

    See also:

    Checking the coolant level
    Checking the coolant level 1) “FULL” level mark 2) “LOW” level mark Check the coolant level at each fuel stop. 1. Check the coolant level on the outside of the reservoir while the eng ...

    Initialization
    Select “Initialize” using . ● Initializing the sound settings Select “Sound setting” using and press (YES). For details about sound settings ● Initializing the device inf ...

    Reprogramming a single HomeLink® button
    To reprogram a HomeLink® Universal Transceiver button, complete the following. 1. Push and hold the desired HomeLink® button. Do not release the button until step 4 has been completed. 2. Wh ...