Subaru Forester: Parking brake
To set the parking brake, depress the brake pedal firmly and hold it down until the parking brake lever is fully pulled up.
To release the parking brake, pull the lever up slightly, press the release button, then lower the lever while keeping the button pressed.
When the parking brake is set while the engine is running, the parking brake warning light illuminates. After starting the vehicle, be sure that the warning light has turned off before the vehicle is driven.
Refer to “Brake system warning light”.
Never drive while the parking brake is set because this will cause unnecessary wear on the brake linings.
Before starting to drive, always make sure that the parking brake has been fully released.
Parking tips
When parking your vehicle, always perform
the following procedure.
- Apply the parking brake firmly.
- For MT models, put the shift lever in
the “1” (1st) position when on an upgrade
or th ...
See also:
Ruts and gravel roads
Observe the following rules when driving along ruts in off-road terrain or on
roads with loose gravel:
Check that the ruts are not too deep and that your vehicle has sufficient clearance.
Othe ...
European declaration of conformity
Hereby, DENSO CORPORATION
declares that this DN-NS-019 is in
compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC. ...
Terms
It is important to familiarize yourself with the
following terms before loading your vehicle:
- Curb Weight (actual weight of your
vehicle) - vehicle weight including:
standard and optional eq ...
