Subaru Forester: Operating the HomeLink® Wireless Control System
Once programmed, the HomeLink® Wireless Control System can be used to remote-control the devices to which its buttons are programmed. To activate a device, simply press the appropriate button.
The indicator light illuminates, indicating that the signal is being transmitted.
Programming for entrance gates and garage door openers in Canada
1. Unplug the motor of the entrance gate
or garage door opener from the outlet.
NOTE
If any of the HomeLink® buttons are
already programmed for other devices,
skip step 2 because it clears t ...
Programming other devices
To program other devices such as door
locks, home lighting and security systems,
contact HomeLink® at www.homelink.com
or call 1-800-355-3515. ...
See also:
Position of the steering wheel when the EASY-ENTRY/EXIT feature is active
The steering wheel swings upwards when you:
remove the SmartKey from the ignition lock
open the driver's door and KEYLESS-GO is in position 1
open the driver's door and the SmartKey is ...
Connectable iPod® models Type C audio:
Type D audio:
Do not connect an iPod® other than
the previously stated models. Doing
so may result in a malfunction or,
depending on conditions, cause a
fire.
NOTE
- iPod® is a r ...
Engine oil
To check and refill engine oil
The engine oil used has a significant effect on the engine’s performance, service
life and startability. Be sure to use oil of the recommended quality and appropr ...
