Nissan Rogue: Manual command selection
Commands can be selected manually. While the
commands are displayed on the audio screen,
select a command by operating the audio tuning
switch, and then push the 
switch.
Once a
command is manually selected, the voice
command function is cancelled. To return to
voice command mode, push the 
switch
to
cancel the current operation, and then perform
the first procedure of voice command.
INFO
- If you are controlling the telephone system
by voice command for the first time or do not
know the appropriate voice command,
speak “Help”. The system announces the
available commands.
...
Control buttons
Control buttons
The control buttons for the Bluetooth® Hands-
Free Phone System are located on the steering
wheel.
PHONE SEND
Push the button to initiate a VR
session or
answer an inco ...
See also:
Engine
Display messages
Possible causes/consequences and Solutions
Check Coolant
Level See Operator's Manual
The coolant level is too low.
Add coolant, observing the war ...
Exhaust System
The best protection against carbon monoxide entry into
the vehicle body is a properly maintained engine exhaust
system.
If you notice a change in the sound of the exhaust system;
or if the exha ...
Panic alarm
To activate: press button
1 for at least one second.
An alarm sounds and the exterior lighting flashes.
To deactivate: press button
1 again.
or
Insert the SmartKey into the ign ...
