Jeep Liberty: Lubricant Selection - Transfer Case - Maintenance Procedures - Maintaining Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Lubricant Selection

Use only manufacturer’s recommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information.

    Draining Fluid
    First remove the fill plug (1), then the drain plug (2). Recommended tightening torque for the drain and fill plugs is 15–25 ft lbs (20–34 N·m). CAUTION! Do not over-tighten the plugs. You ...

    Frequency Of Fluid Change
    Under normal operating conditions, the fluid installed at the factory will give satisfactory lubrication for the life of the vehicle. Fluid changes are not necessary unless the fluid becomes con ...

    See also:

    Using voice commands
    The driver initiates a voice command dialogue by pressing the voice control button (see the illustration on page 241). When a dialogue has been initiated, commonly used commands will be shown i ...

    Fog lamp switch
    Front fog lamp switch* The front fog lamps can be operated while the headlamps and tail lamps are on. Turn the knob in the “ON” direction to turn on the front fog lamps. An indicator lamp i ...

    Scanning files
    1 Press . The first 10 seconds of all files in the folder will be played. 2 When the desired folder is reached, press again. ...