GMC Terrain: Starting the Vehicle - Remote Vehicle Start - Initial Drive Information - In Brief - GMC Terrain Owner's ManualGMC Terrain: Starting the Vehicle

1. Press and release Keyless Entry transmitter. on the Remote Keyless Entry transmitter.

2. Press and hold seconds. The turn signal lamps will briefly flash to confirm the vehicle has been for about two seconds. The turn signal lamps will briefly flash to confirm the vehicle has been started. The parking lamps will turn on and remain on as long as the engine is running. The vehicle's doors will be locked.

3. The key must be inserted and turned to ON/RUN before driving.

The engine will shut off after 10 minutes unless a time extension is done or the key is inserted and turned to ON/RUN.

    Remote Vehicle Start
    With this feature the engine can be started from outside of the vehicle. ...

    Canceling a Remote Start
    To cancel a remote start, do one of the following: ○ Press until the parking lamps turn off. ○ Turn on the hazard warning flashers. ○ Insert the key and turn it to ON/ RUN and ...

    See also:

    Vehicle identification plate with vehicle identification number (VIN) and paint code number
    Open the driver's door. You will see vehicle identification plate 1. Example: vehicle identification plate (USA only) 2 Paint code 3 VIN Example: vehicle identification plate (Canad ...

    AWD warning light
    The AWD warning light is located in the meter. The AWD warning light illuminates when the ignition switch is turned to the ON position. It turns off soon after the engine is started. If any ma ...

    Checking and changing the engine coolant
    WARNING: Do not remove the radiator cap when the engine is hot. When the engine is hot, the engine coolant is under pressure and may erupt through the opening if the cap is removed. You coul ...