GMC Terrain: Key Lock Release
Vehicles with an automatic transmission are equipped with an electronic key lock release system.
The key lock release is designed to prevent ignition key removal unless the shift lever is in P (Park).
The key lock release is always functional except in the case of an uncharged or low voltage (less than 9&-volt) battery. If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery. See Jump Starting on page 10‑76.
If charging or jump starting the battery does not work, locate the hole below the ignition lock. Insert a flat bladed tool or another key from the key chain into the opening. When the lever can be felt, actuate the lever toward the driver, and remove the key from the ignition.
Ignition Positions
The ignition switch has four different positions.
Notice: Using a tool to force the key to turn in the ignition could cause damage
to the switch or break the key. Use the correct key, make sure i ...
Starting the Engine
Move the shift lever to P (Park) or N (Neutral). The engine will not start in
any other position. To restart the vehicle when it is already moving, use N (Neutral)
only.
Notice: Do not try to shi ...
See also:
CD Player
Pressing the top of the switch once will go to the next
track on the CD. Pressing the bottom of the switch once
will go to the beginning of the current track, or to the
beginning of the previous ...
Releasing seat belts
Press release button 4() and guide belt tongue 2 back towards
belt sash guide 1.
Make sure that the seat belt is fully rolled up. Otherwise, the seat belt or
belt tongue will be trapped ...
Sound stage
The sound experience can be optimized for the
driver's seat, both front seats or the rear seat.
If the front and rear seats are occupied, the
sound stage setting Front seats is recommended.
Sele ...
