Volvo XC60: Installing the ball holder - Detachable trailer hitch (accessory) - Towing a trailer - During your trip - Volvo XC60 Owner's ManualVolvo XC60: Installing the ball holder

1. If necessary, remove the cotter pin from the locking bolt and slide the locking bolt out of the hitch assembly.

2. Slide the ball holder into the hitch assembly.

3. Align the hole in the ball holder with the one in the hitch assembly.

4. Slide the locking bolt through the hitch assembly/ball holder.

5. Insert the cotter pin in the hole at the end of the locking bolt.

    Detachable trailer hitch (accessory)
    Detachable trailer hitch (accessory) a Ball holder b Locking bolt c Cotter pin d Hitch assembly e Safety wire attachment ...

    Removing the ball holder
    1. Remove the cotter pin from the locking bolt and slide the locking bolt out of the ball holder/hitch assembly. 2. Pull the ball holder out of the hitch assembly. NOTE A cover for the hitch as ...

    See also:

    Types of collisions that may not deploy the SRS side airbags and curtainshield airbags
    The SRS side airbag and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body oth ...

    Capacities
    ...

    Hill Start Assist (HSA)
    The HSA system is designed to help the driver accelerate the vehicle from a complete stop while on an incline. If the driver releases the brake while stopped on an incline, HSA will continue to ...