Toyota RAV4: Installation with LATCH system (second outside seats only)
Fold the seatback while pulling the lever. Return the seatback and secure it at the 1st lock position (most upright position). Adjust the seatback to the 7th lock position.
1st lock position
7th lock position
Type A
Latch the hooks of the lower straps onto the LATCH anchors. The bars are installed in the clearance between the seat cushion and seatback. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada:
The symbol on a child restraint system indicates the presence of a lower connector system.
Type B
Latch the buckles onto the LATCH anchors. The bars are installed in the clearance between the seat cushion and seatback. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada:
The symbol on a child restraint system indicates the presence of a lower connector system.
Installing child restraints
Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the outside rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when insta ...Installing child restraints using a seat belt (child restraint lock function belt)
■ Rear facing - Infant seat/convertible seat Place the child seat on the rear seat facing the rear of the vehicle. Run the seat belt through the child seat and insert the plate into the ...See also:
Example of the type of accident in which the SRS curtain airbag will
basically not deploy.
The SRS curtain airbags are not basically
designed to deploy if the vehicle pitches
end over end. ...
Engine hood
To open the hood:
1. If the wiper blades are lifted off the
windshield, return them to their original
position.
2. Pull the hood release knob under the
instrument panel.
3. Release the se ...
Passive arming
When passive arming mode has been
programmed by the dealer, arming of the
system is automatically accomplished
without using the remote transmitter. Note
that in this mode, DOORS MUST BE
MAN ...