Volvo XC60: High beam, Halogen - Replacing bulbs - Maintenance and specifications - Volvo XC60 Owner's ManualVolvo XC60: High beam, Halogen

1. Remove the headlight housing from the

1. Remove the headlight housing from the vehicle (see page 322).

2. Remove the cover over the bulbs (see page 323).

3. Remove the bulb by turning it counterclockwise and pulling it straight out.

4. Remove the connector from the bulb.

5. Press the new bulb into the socket and turn it clockwise to put it in place. It can only be secured in one position.

6. Reinsert the bulb holder into the headlight housing.

7. Put the cover back into position and reinstall the headlight housing.

    Low beam, Halogen
    1. Remove the headlight housing from the vehicle (see page 322). 2. Remove the cover over the bulbs (see page 323). 3. Unplug the connector from the bulb. 4. Remove the bulb by pressing the h ...

    Extra high beam
    1. Remove the headlight housing from the vehicle (see page 322). 2. Remove the cover over the bulbs (see page 323). 3. Disconnect the wiring connector from the bulb holder. 4. Remove the bu ...

    See also:

    Vehicle Storage
    WARNING Batteries have acid that can burn you and gas that can explode. You can be badly hurt if you are not careful. See Jump Starting on page 10‑76 for tips on working around a battery wi ...

    All-Wheel Drive (AWD) (if so equipped)
    - For AWD equipped vehicles, do not attempt to raise two wheels off the ground and shift the transmission to any drive or reverse position with the engine running. Doing so may result in ...

    Driver Safety Belt Reminder Light
    There is a driver safety belt reminder light on the instrument panel cluster. When the vehicle is started, this light flashes and a chime may come on to remind the driver to fasten their safety b ...