Nissan Rogue: Heater operation
Heating:
This mode is used to direct heated air to the foot outlets.
1. Push the air recirculation button 
to the
OFF position. (The indicator light turns off.)
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control 
dial
to the
desired position.
4. Turn the temperature control dial to the desired position between the middle and the hot (right) position.
Ventilation:
This mode directs outside air to the side and center ventilators.
1. Push the air recirculation button 
to the
OFF position. (The indicator light turns off.)
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control 
dial
to the
desired position.
4. Turn the temperature control dial to the desired position.
Defrosting or defogging:
This mode directs the air to the defroster outlets to defrost/defog the windows.
1. Turn the air flow control dial to the position.
2. Turn the fan speed control dial to the
desired position.
3. Turn the temperature control 
dial to the
desired position between the middle and the
hot (right) position.
- To remove frost from the outside surface of
the windshield quickly, turn the temperature
control dial to the maximum hot position and
the fan speed control 
dial to
maximum
(HI) position.
- If it is difficult to defog the windshield, turn the A/C button on.
Bi-level heating:
This mode directs cool air from the side and center vents and warm air from the foot outlets.
When the temperature control dial is turned to the maximum hot or cool position, the air between the ventilators and the foot outlets is the same temperature.
1. Push the air recirculation button 
to the
OFF position. (The indicator light turns off.)
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control 
dial
to the
desired position.
4. Turn the temperature control dial to the desired position.
Heating and defogging:
This mode heats the interior and defogs the windows.
1. Turn the air flow control dial to the
position.
2. Turn the fan speed control 
dial
to the
desired position.
3. Turn the temperature control dial to the desired position.
Controls
Outside air circulation:
Push the air recirculation button to turn off the
indicator light on the button. The air flow is
drawn from outside the vehicle.
Air recirculation:
Push the air recircu ...
Air conditioner operation
The air conditioner system should be operated
for approximately 10 minutes at least once a
month. This helps prevent damage to the air
conditioner system due to the lack of lubrication.
Cooling ...
See also:
Infants or small children
Use a child restraint system that is
suitable for your vehicle. Refer to “Child
restraint systems”. ...
Enhanced Accident Response System
In the event of an impact causing air bag deployment, if
the communication network remains intact, and the
power remains intact, depending on the nature of the
event the ORC will determine wheth ...
Temperature
A temperature increase will accelerate the rate
of corrosion to those parts which are not well
ventilated. ...
