Suzuki Grand Vitara: Head Restraints
Head Restraints
Head restraints are designed to help reduce the risk of neck injuries in case of an accident. Adjust the head restraint to the position which places the center of the head restraint closest to the top of your ears. If this is not possible for very tall passengers, adjust the head restraint as high as possible.
WARNING:
• Never drive the vehicle with the head restraints removed.
• Do not attempt to adjust the head restraint while driving.
Front
To raise the head restraint, pull upward on the restraint until it clicks. To lower the restraint, push down on the restraint while holding in the release knob (1). If a head restraint must be removed (for cleaning, replacement, etc.), use the following procedure.
1) Insert a sharp-pointed tool into the small hole (2). Push the tip into the hole (2) and hold it while pushing in the release knob (1). 2) Pull the head restraint all the way out while pushing the release knob (1) and holding the tip in the hole (2).
NOTE: It may be necessary to recline the seatback to provide enough overhead clearance to remove the head restraint.
To reinstall the head restraint, insert the head restraint bars into the holes (2) and push the head restraint down.
Rear
To raise the rear head restraint, pull upward on the restraint until it clicks. To lower the restraint, push down on the restraint while holding in the release knob. If a head restraint must be removed (for cleaning, replacement, etc.), push in the release knob and pull the head restraint all the way out. When installing a child restraint system, raise the head restraint to the most upper position.
Seat Adjustment
WARNING: Never attempt to adjust the driver’s seat or seatback while driving. The seat or seatback could move unexpectedly, causing loss of control. Make sure that the driver’s seat and seatb ...Seat Belts and Child Restraint Systems
WARNING: An air bag supplements, or adds to, the frontal crash protection offered by seat belts. The driver and all passengers must be properly restrained by wearing seat belts at all times, wh ...See also:
Calling up a stored parking position setting
Turn the SmartKey to position 2 in the ignition lock.
Adjust the exterior mirror on the frontpassenger side with the corresponding
button ().
Engage reverse gear. The exterior mirror on the ...
Using KEYLESS-GO
The KEYLESS-GO key must be outside the vehicle. All the doors must be closed.
Touch recessed sensor surface 1 on the door handle until the side windows
and the panorama roof with power tilt/s ...
Turning Confirmation Prompts ON/OFF
Turning confirmation prompts off will stop the system
from confirming your choices (e.g., the Uconnectâ„¢
Phone will not repeat a phone number before you dial it).
• Press the button to begin. ...