Toyota RAV4: Gauges and meters - Instrument cluster - When driving - Toyota RAV4 Owner's ManualToyota RAV4: Gauges and meters

Vehicles without smart key system

Vehicles without smart key system

The following gauges, meters and displays illuminate when the engine switch is in the “ON” position.

Vehicles with smart key system

The following gauges, meters and displays illuminate when the “ENGINE START STOP” switch is in IGNITION ON mode.

1 Tachometer
Displays the engine speed in revolutions per minute. 2 Speedometer
Displays the vehicle speed. 3 Engine coolant temperature gauge
Displays the engine coolant temperature. 4 Fuel gauge
Displays the quantity of fuel remaining in the tank.

5 Trip information display
6 Automatic transmission shift position indicator lights
7 Odometer/trip meter

Odometer
Displays the total distance the vehicle has been driven.

Trip meter
Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently.

8 Odometer/trip meter switching and trip meter resetting button
Switches between odometer and trip meter displays. Pushing and holding the button will reset the trip meter when the trip meter is being displayed.

    Instrument panel light control
    The brightness of the instrument panel lights can be adjusted. 1 Brighter 2 Darker When the headlight switch is turned on, the brightness will be reduced slightly unless the control dial is tu ...

    See also:

    Wear indicators
    1) New tread 2) Worn tread 3) Tread wear indicator Each tire incorporates a tread wear indicator, which becomes visible when the depth of the tread grooves decreases to 0.063 in (1.6 mm). ...

    Rear Window Defogger
    REAR (Rear Defogger): Press to turn the rear window defogger on or off. The rear window defogger turns off after about 10 minutes. It can also be turned off by turning the ignition to ACC/ACCESSO ...

    Displaying the device status
    Select “Bluetooth info” using . ● Displaying the device name Select “Device Name” using . ● Displaying the device address Select “Device Address” using . ...