Volvo XC60: Function check - Indicator, information, and warning symbols - Instruments and controls - Your driving environment - Volvo XC60 Owner's ManualVolvo XC60: Function check

All indicator and warning symbols light up in ignition mode II or when the engine is started.

When the engine has started, all the symbols should go out except the parking brake symbol, which only goes out when the brake is disengaged.

If the engine does not start or if the function check is carried out in ignition mode II, all symbols go out after 5 seconds except the symbol for faults in the vehicle's emissions system and the symbol for low oil pressure.

Certain symbols may not have their functions illustrated, depending on the vehicle's equipment.

    Indicator, information, and warning symbols
    Indicator and warning symbols 1 High beam and turn signal indicators 2 Indicator and warning symbols 3 Information symbols 4 Indicator and warning symbols ...

    Indicator and information symbols
    Fault in the Active Bending Light (ABL) system This symbol will illuminate if the there is a fault in the ABL system. See page 93 for more information about this system. Malfunction ...

    See also:

    Folding the rear seat backrest back
    : Backrest ; Lock verification indicator = Backrest release handle Move the driver's or front-passenger seat forward if necessary. Make sure that the seat belt does not become ...

    Moving the vehicle
    If the message Normal mode is displayed when Safety mode See manual is no longer displayed, the vehicle may be moved carefully from its present position, if for example, it is blocking traffic ...

    Fuel tank capacity
    Avoid the risk of running out of fuel and never intentionally drive the vehicle when the fuel gauge indicates that the tank is empty. When refuelling your vehicle after the fuel gauge reads empty, ...