Range Rover Evoque: Exterior mirrors
Exterior mirrors
1. Mirror selector switches. Press to select
the left or right mirror.
2. Mirror adjustment switch. Move
up/down/left or right to adjust the mirror
glass.
3. Press both selector switches together to
fold/unfold the mirrors (power fold
option).
The mirrors can be adjusted and folded when
the ignition is on and for up to 5 minutes after
the ignition is switched off, provided the
driver’s door is not opened.
Note: Powerfold will operate only if vehicle
speed is below 113km/h (70 mph).
Note: The rear view door mirror heaters
operate automatically according to the external
temperature and windscreen wiper operation.
Note: An amount of knock protection is
designed into the door mirrors. If a mirror is
accidentally knocked inwards or manually
folded inwards, the mirror head will be
disengaged from the folding mechanism. To
re-engage the mechanism, fold then unfold the
mirror using the switch.
Note: A thermal cut-out which will temporarily
disable the powerfold feature if the switches
are operated repeatedly.
READ NEXT:
Powerfold mirrors can be configured to
automatically fold when the vehicle is locked
and unfold when unlocked.
This function can be enabled/disabled
by your Dealer/Authorised Repairer.
Note: If
If the vehicle is equipped with memory seats,
when reverse gear is selected the door mirrors
can be set to automatically adjust, providing an
improved viewing angle of the curb side for
reversing.
Auto dimming mirror
1. Ambient light sensor.
2. High beam assist sensor.
Interior mirror dimming will adjust
automatically according to the amount of
ambient light when the ignition is on. If r
SEE MORE:
Component Location
COMPONENT LOCATION SHEET 1 OF 2
Battery
ECM (engine control module)
CJB (central junction box)
Passenger air bag
Overhead console
RCM (restraints control module)
Driver air bag
Driver lower air bag
Clockspring
Adaptive steering column
BJB (battery junction box)
COMPO
Special Tool(s)
310-123
Locking Ring, Fuel Tank
Removal
WARNINGS:
Wait for a minimum of 1 minute after the engine has stopped before
carrying out any repair to the fuel injection
system.
Avoid flames, sparks or lighted substances.
CAUTION: Be prepared to collect escaping fuel.
NOTE: Removal step
© 2011-2024 Copyright www.rrevoque.org