Range Rover Evoque: Entry gate programming

The technology of some entry gates requires you to press and re-press (cycle) the hand-held transmitter button every two seconds during programming.

Continue to press and hold the desired HomeLink button while you cycle your hand-held transmitter until the indicator lamp flashes rapidly.

READ NEXT:

 Information and assistance

It is recommended that when you sell or dispose of the vehicle, the programmed HomeLink buttons be erased for security purposes. For information on the range of available compatible products or

 Instrument panel

Instrument panel 1. Speedometer. 2. Driver Information Centre (message centre). 3. Tachometer. 4. Temperature gauge Serious engine damage can occur if the vehicle is driven while the engin

 Vehicle information and settings menu

Vehicle information and settings menu A number of vehicle features and display settings may be configured via the vehicle information and settings menu. To display and navigate through the vehic

SEE MORE:

 Headlamp Adjustment

NOTE: The headlamp setting is 1.2 % below horizontal and parallel. 1. Align the headlamp beam setting equipment to one headlamp. 2. Switch the headlamps on and to dipped beam. 3. NOTE: NAS vehicles have vertical adjustment only. Adjust the headlamps with an Allen Key. Rotate the adjuster 'A' for

 Disabling stop/start

Disabling stop/start To switch the system off (preventing automatic stop/start) press the ECO switch. The LED indicator will extinguish to confirm that the system is off. Note: The engine will restart automatically If the switch is pressed to disable the system, while an automatic engine st

© 2011-2024 Copyright www.rrevoque.org