Volvo XC60: Engaging the cruise control function - Operation - Cruise control - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: Engaging the cruise control function

Before a speed can be set, the cruise control system must be engaged (put in standby mode).

Press the > The symbol illuminates and the symbol (1).

> The symbol text illuminates and the text (---) mph (5) indicates that cruise control is in standby mode.

NOTE
• Putting cruise control in standby mode does not set a cruising speed.
• When cruise control is in standby mode, the driver's seat belt must be fastened before a cruising speed can be set.

    Operation
    Steering wheel-mounted controls and display 1 Standby mode 2 Resume set speed 3 Deactivating 4 Activate/set speed 5 Set speed indicator (parentheses indicate standby mode) ...

    Setting a speed
    Use the or buttons set the vehicle's current speed. The set speed is shown in the display. NOTE Cruise control cannot be engaged at speeds below 20 mph (30 km/h). ...

    See also:

    Driving
    This section gives you tips on starting the engine under various conditions, and how to operate the automatic transmission. It also includes important information on parking your vehicle, th ...

    Facts about TSA
    • TSA intervenes at speeds above approximately 40 mph (60 km/h) • The DSTC symbol () in the instrument panel will flash when TSA is working • If the driver switches off the DSTC system's ...

    Selection Of Lubricant
    It is important that the proper lubricant is used in the transmission to assure optimum transmission performance. Use only manufacturer’s recommended transmission fluid. Refer to “Fluids, Lub ...