Volvo XC60: Deactivation
Move the gear selector from R to another position.
There is a slight delay in the PAC system, which means that the view from behind the vehicle will remain on the screen for approximately 15 seconds after the gear selector has been moved from the R position or until the vehicle reaches a forward speed of 6 mph (10 km/h). The screen will then revert to the mode that it was in before R was selected and will, for example, display navigation system information.
NOTE
If any button on the center console control
panel is pressed, the camera image will disappear
from the display. Pressing CAM will
return the camera image to the display.
Zoom
The camera can be useful when attaching a trailer. Press CAM to zoom in on the trailer hitch (and press this button again to return to the normal camera view). With the camera zoomed in on the ...Guiding lines
The lines on the screen are projected as if they were a path on the ground behind the vehicle and are affected by the way in which the steering wheel is turned. This enables the driver to se ...See also:
If Steam is Coming from the Engine Compartment
WARNING
Steam from an overheated engine can burn you badly, even if you just open the
hood. Stay away from the engine if you see or hear steam coming from it. Just turn
it off and get everyone aw ...
Windshield Washers
Check the fluid level in the
windshield washer reservoir at least
monthly during normal use.
Check the fluid level by removing
the cap and looking at the level
gauge.
On Canadian models: T ...
Service Parts Identification Label
This label, on the inside of the glove box, has the following information:
○ Vehicle Identification Number (VIN).
○ Model designation.
○ Paint information.
○ Production opt ...