Subaru Forester: D (Drive) - Select lever - Automatic transmission - Starting and operating - Subaru Forester Owner's ManualSubaru Forester: D (Drive)

This position is for normal driving.

The transmission automatically shifts into a suitable gear from 1st to 4th according to the vehicle speed and the acceleration you require.

When more acceleration is required in this position, depress the accelerator pedal fully to the floor and hold that position. The transmission will automatically downshift to 3rd, 2nd or 1st gear. When you release the pedal, the transmission will return to the original gear position.

To use the “SPORT” mode, move the lever from this position into the manual gate. To use the manual mode, move the lever from this position into the manual gate then move it toward the “+” and “−” ends.

    N (Neutral)
    This position is for restarting a stalled engine. In this position the wheels and transmission are not locked. In this position, the transmission is neutral; the vehicle will roll freely, eve ...

    While climbing a grade
    When driving up a hill, undesired upshift to 4th gear is prevented from taking place when the accelerator is released. This minimizes the chance of subsequent downshifting to a lower gear when ...

    See also:

    Hill Start Assist (HSA) — If Equipped
    When on is selected, the HSA system is active. Refer to “Electronic Brake Control System” in “Starting And Operating” for system function and operating information. To make your selection ...

    Voice guidance
    To turn voice guidance on or off but maintain route guidance, proceed as follows: 1. Touch Nav menu on the map menu screen. 2. Touch the Route voice guidance soft key. The soft key will be highlig ...

    Tire Maintenance
    In addition to proper inflation, correct wheel alignment helps to decrease tire wear. If you find a tire is worn unevenly, have your dealer check the wheel alignment. Have your dealer check t ...