Nissan Rogue: Continuously Variable Transmission (CVT)
The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the selector lever is moved to the P (Park) position.
- When turning the ignition switch to the LOCK position, make sure that the selector lever is in the P (Park) position.
- When removing the key from the ignition switch (if it is inserted), make sure that the selector lever is in the P (Park) position.
When the ignition switch cannot be turned to
the LOCK position:
1. The SHIFT P warning (if so equipped)
appears on the vehicle information display
and a chime sounds.
2. Move the selector lever to the P (Park) position.
3. Turn the ignition switch slightly in the ON direction.
4. Turn the ignition switch to the LOCK position.
5. Remove the key, if it is inserted in the ignition switch.
If the ignition switch is turned to the LOCK position, the selector lever cannot be moved from the P (Park) position. The selector lever can be moved if the ignition switch is in the ON position with the foot brake pedal depressed.
The OFF position 1 is between the LOCK and ACC positions, although it is not marked on the ignition switch.
Intelligent Key system (if so equipped)
Intelligent Key system (if so equipped) The Intelligent Key system can operate the ignition switch without taking the key out from your pocket or purse. The operating environment and/or con ...Key positions
LOCK (0) Except for the Intelligent Key equipped model: The key can only be removed from the ignition switch at this position. For the Intelligent Key equipped model: PUSH OFF - The ignition ...See also:
When to replace tires
The original tires on your car have tread
wear indicators . The location of tread
wear indicators is shown by the "TWI"
or "" marks, etc., The tread wear
indicators appea ...
Brakes
Brake Fluid
Check the brake fluid level by looking at the reservoir in the engine compartment.
Check that the fluid level is between the “MAX” and “MIN” lines. If the brake fluid
level i ...
Auto-Down Feature
The driver’s and front passenger’s (if equipped for passenger
side) power window switches have an “Auto-
Down” feature. Press the window switch past the first
detent, release, and the wi ...