Ford Escape: Compass zone adjustment - Electronic compass (if equipped) - Driver Controls - Ford Escape Owner's ManualFord Escape: Compass zone adjustment

1. Determine which magnetic zone you are in for your geographic location by referring to the zone map.
2. Turn ignition to the on position.
3. Start the engine.

4. Press the SETUP control to select

4. Press the SETUP control to select the Update Zone function and display the current ZONE XX in the center stack display.

5. Continue to press the RESET

5. Continue to press the RESET control until the correct zone appears in the center stack display.

6. The direction will display after

6. The direction will display after the RESET control is released. The zone is now updated.

Compass calibration adjustment

    Electronic compass (if equipped)
    The compass heading is displayed in the center stack display. The compass reading may be affected when you drive near large buildings, bridges, power lines and powerful broadcast antenna. Magnetic ...

    Compass calibration adjustment
    Perform compass calibration in an open area free from steel structures and high voltage lines. For optimum calibration, turn off all electrical accessories (heater/air conditioning, wipers, etc.) an ...

    See also:

    Changing a wheel
    Removing a wheel Location of jack, towing eyelet1 and tools ...

    Emergency starting
    Jump starting Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehicle or battery, follow the jump starting procedures listed on page 6-6. ...

    Steering Wheel
    Steering Wheel Check the play of the steering wheel by gently turning it from left to right and measuring the distance that it moves before you feel slight resistance. The play should be betwe ...