Toyota RAV4: Coast braking function
●Holding the lever down to decrease the set speed activates the brake
system automatically, decelerating the vehicle quickly.
While the brake system is operating, the stop lights and high mounted
stoplight will turn on.
●A sound may be heard from the engine compartment during the operation
of the brake system. The sound means the brake system is operating
and it does not indicate a malfunction.
Cruise control can be set when
●The shift lever is in D or 3 (4-speed models), or D or 4 (5-speed models).
●Vehicle speed is above approximately 25 mph (40 km/h).
■Accelerating after setting the vehicle speed
& ...
Automatic cruise control cancelation
Cruise control will stop maintaining the vehicle speed in any of the
following
situations.
●Actual vehicle speed falls more than approximately 10 mph (16 km/h)
below the preset vehicle sp ...
See also:
Ignition Switch Light
The ignition switch light comes on
when you open the driver’s door. It
fades out in about 30 seconds after
the door is closed. ...
Hazard Warning Switch
Hazard Warning
Switch
Push in the hazard warning switch to activate the hazard warning lights. All
four turn signal lights and both turn signal indicators will flash simultaneously.
To turn of ...
Hazard warning flasher
The hazard warning flasher causes the rear tail lights and front turn signal
lights to flash on and off, which serves as a warning to other drivers to exercise
caution when approaching or passin ...
