Subaru Forester: Clock
Clock
The clock shows the time while the ignition switch is in the “Acc” or “ON” position.
The time changes by 1 minute each time the “+” button or “−” button is pressed.
Pressing the “+” button moves the displayed time forward, while pressing the “−” button moves the displayed time back.
Pressing and holding either button changes the displayed time continuously.
To ensure safety, do not attempt to set the time while driving, as an accident from inadequate attention to the road could result.
NOTE
If the battery is disconnected, the time
will be erased. After reconnecting the
battery, set the correct time.
Headlight indicator light
This indicator light illuminates when the headlight switch is placed in the “” or “” position. ...Information display
Information display 1) Outside temperature indicator 2) Fuel consumption indicator With the ignition switch in the “ON” position, the outside temperature and fuel consumption are indic ...See also:
Vehicle Dynamics Control system monitor
Refer to “Vehicle Dynamics Control warning
light/Vehicle Dynamics Control operation
indicator light” and “Vehicle
Dynamics Control OFF indicator light”. ...
Safety chains
Always use a suitable chain between your
vehicle and the trailer. The safety chains should
be crossed and should be attached to the hitch,
not to the vehicle bumper or axle. The safety
chains ...
Important safety notes
WARNING
When leaving the vehicle, always remove the SmartKey from the ignition lock.
Always take the SmartKey with you and lock the vehicle. Do not leave children unsupervised
in the vehicle ...