Mercedes-Benz GLK-Class: Checking tire pressure manually
To determine and set the correct tire pressure, proceed as follows:
- Remove the valve cap of the tire that is to be checked.
- Press the tire pressure gauge securely onto the valve.
- Read the tire pressure and compare it with the recommended value on the Tire and Loading Information placard on the B-pillar on the driver's side of your vehicle.
- If necessary, increase the tire pressure to the recommended value ().
- If the tire pressure is too high, release air by pressing down the metal pin in the valve using the tip of a pen, for example. Then check the tire pressure again using the tire pressure gauge.
- Screw the valve cap onto the valve.
- Repeat these steps for the other tires.
Important safety notes
WARNING Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more ...See also:
Pre-towing tips
- Be certain your vehicle maintains a level
position when a loaded or unloaded trailer is
hitched. Do not drive the vehicle if it has an
abnormal nose-up or nose-down condition;
check for impr ...
Ringing volume
In phone mode, go to Phone menu
Phone
settings
Sounds and volume
Ring
volume and adjust the volume by turning
VOL. Save the setting by pressing EXIT. ...
Vehicle Dynamics Control OFF switch
Vehicle Dynamics Control OFF switch
Pressing the switch to deactivate the
Vehicle Dynamics Control system can
facilitate the following operations:
- a standing start on a steeply sloping
...