Volvo XC60: Cargo area lighting
NOTE
Before starting to replace a bulb, see
page 322.
1. Insert a screwdriver and gently turn so that the bulb housing comes loose.
2. Replace the bulb.
3. Check that the bulb illuminates and press it back into the bulb housing.
License plate lighting
1. Remove the screws with a screwdriver. 2. Carefully detach the entire bulb housing and pull it out. 3. Replace the bulb. 4. Reinsert the entire bulb housing and tighten the screws. ...Vanity mirror lighting
Removing the mirror glass 1. Insert a screwdriver underneath the lower edge, in the center, turn and carefully pry up the lug on the edge. 2. Carefully detach and lift out the entire mirror ...See also:
Using the Bluetooth® audio/phone for the first time
Before using the Bluetooth® audio/phone, it is necessary to register a
Bluetooth® device in the system. Follow the procedure below to register
(pair) a device:
1 Press and select “Bluetooth” ...
Keys and Locks
The master key fits all the locks on
your vehicle. The valet key works
only in the ignition and the driver’s
door lock. You can keep the glove
box locked when you leave your
vehicle an ...
Unlocking the rear gate
Unlocking the rear gate
Pressing the “” button unlocks
the rear
gate.
An electronic chirp will sound twice and
the turn signal lights will flash twice. ...