Subaru Forester: Behavior with key lock-in prevention function non-operational
- If the lock lever is turned to the rear (“LOCK”) position with the driver’s door open and the driver’s door is then closed with the lock lever in that position, the driver’s door is locked.
- If the spare key is used to lock the driver’s door from the outside of the vehicle, the door is locked.
The setting of this function to operational/ non-operational status can be changed by a SUBARU dealer. Contact a SUBARU dealer for details.
NOTE
When leaving the vehicle, make sure
you are holding the key before locking
the doors.
Behavior with key lock-in prevention function operational
With the driver’s door open, the doors are automatically kept unlocked even if the front side of the power door locking switch is pressed. ...Remote keyless entry system
- Do not expose the remote transmitter to severe shocks, such as those experienced as a result of dropping or throwing. - Do not take the remote transmitter apart except when replacing ...See also:
Initialization
When the ignition switch is placed in the ON
position, NISSAN Voice Recognition is initialized,
which takes a few seconds. If the
button is pushed before the initialization completes,
the sys ...
Useful information
This Operator's Manual describes all models and all standard and optional equipment
of your vehicle available at the time of publication of the Operator's Manual. Country-specific
diffe ...
Methyl tertiary butyl ether (MTBE)
Unleaded fuel containing an oxygenate known
as MTBE can be used provided that the ratio of
MTBE to conventional fuel does not exceed
15%. MTBE is an Ether based compound
derived from Petroleum, wh ...