Ford Escape: Removing the jack and tools
1. The jack and tools are located
under the carpeted load floor.
2. Pull back the carpet away from
the liftgate, and remove the
hardboard cover. If your vehicle is
equipped with a cargo management
system, the jack and tools are in the
forward compartment under a lid.
3. Unbuckle the strap and remove
the jack and tools by pulling the
right side up first.
4. Remove the tools from the jack in
order to remove the spare tire from
under the vehicle.
5. Remove the lug wrench from the jack in order to remove the spare tire from under the vehicle.
Stopping and securing the vehicle
1. Park on a level surface, set the
parking brake and activate hazard
flashers.
2. Place gearshift lever in P (Park)
(automatic transmission) or R
(Reverse) (manual transmission)
and turn engine ...
Removing the spare tire or spare tire and tether (if equipped)
1. Insert the lug wrench through the
access hole in the rear bumper.
2. Turn the handle counterclockwise
and lower the spare tire until it can
be slid rearward and the cable is
slack.
3. Slide t ...
See also:
Passing
More passing distance is needed when towing a trailer. Because the rig is longer,
it is necessary to go farther beyond the passed vehicle before returning to the
lane. ...
Keys
Type 1, Type 2
Two keys are provided. The keys fit all locks. Keep one in a safe place as a
spare key.
1- Key for the electronic immobiliser. 2- Key number tag.
1- Key for the electronic immo ...
Settings
To view the settings menu, press the
SETTINGS button (2). When Park Assist is
specified, the icon is changed and the button
will turn Park Assist on and off. The Settings
menu is then accessed via ...
