Volvo XC60: Automatic connection
When the Bluetooth® function is active and the most recently paired device is within range, it is automatically connected. When the infotainment system searches for the most recently paired device, its name is shown in the display.
To connect another paired device, press EXIT. See the following section for information about switching to another device.
Pairing and connecting an external device
Before an external device can be connected, it must be paired to the infotainment system. The procedure for connecting an external device varies, depending whether or not the device has previo ...Switching to another device
It is possible to switch among paired Bluetooth® devices that are in the vehicle. To do so: 1. Press MEDIA several times until Bluetooth is displayed, release the button and wait for several ...See also:
Tail gate
o Pull and raise the "DOOR" release lever to
open the tail gate.
o To close, lower the door, then press down on
it until it locks. To be sure the door is securely
fastened, try to ...
Removing the jumper cables
Remove the jumper cables in the reverse order that they were
connected.
Note: In the illustration, the vehicle on the bottom is used to designate
the assisting (boosting) battery.
1. Remove th ...
Brake system
Power brakes Your vehicle has power-assisted brakes that adjust automatically
through normal usage. In the event that the power-assisted brakes lose power because
of a stalled engine or some other ...