Subaru Forester: Auto-store (type D audio)
Using the Auto-store function, you can automatically store 6 stations on the current waveband (FM-AS or AM-AS) by pressing the button for 1.5 seconds or longer. Use Auto-store to quickly find the strongest stations, for example when traveling through different reception areas.
NOTE
- When the HD Radio function is
turned on, Auto-store cannot be used
while receiving the broadcasting station
with SPS (Supplemental Program
Service).
- When you use Auto-store, the new stations replace any stations previously stored.
- Interrupting Auto-store: If you accidentally press the (Auto-store) button, you can cancel the Auto-store function before it has been completed as follows.
– switching to the other source mode
– pressing the button
– switching to the other band
– turning the “TUNE/TRACK/CH” dial
– pressing the “SCAN” button
Selecting preset stations
1. Press the “FM/AM” button to select FM1, FM2, FM3 (type A, B and C audio)/ FM-AS (type D audio), AM or AM-AS (type D audio) reception. 2. Press the preferred preset button (from to ...Displaying and selecting preset stations (type D audio)
1. Press the button for 1.5 seconds or longer during AM/FM reception to display the radio screen. 2. Operate the “TUNE/TRACK/CH” dial to select the stations. ...See also:
System fault
If a fault is detected in the HDC system, an HDC
warning will be displayed in the message
centre.
If the fault is detected while the system is
operating, HDC will then fade out.
If a fault is det ...
Windows
To avoid serious personal injury
caused by entrapment, always conform
to the following instructions
without exception.
- When operating the power windows,
be extremely careful to
preven ...
Troubleshooting
If Windscreen Sensors blocked appears in
the information display, this indicates that the
City Safety™ laser sensor is obstructed in
some way and cannot detect vehicles ahead of
you, which m ...