Mitsubishi Outlander: Antenna
Roof antenna
To remove
Turn the pole (A) anticlockwise.
To install
Screw the pole (A) clockwise into the base (B) until it is securely retained.
NOTE:
● Be sure to remove the roof antenna in the following cases: • When going into an
automatic car wash. • When placing a car cover over the vehicle.
● Before driving into a structure that has a low ceiling, fold down the antenna
to prevent it from hitting the ceiling.
Handling of compact discs
● Use only the type of compact discs that have the mark shown in the illustration below (playback of CD-R or CDRW discs may cause problems). ● The use of special shaped, damaged c ...Digital clock*
Automatic mode and manual mode is available for digital clock adjustment: Select the automatic mode or the manual mode by performing the following operations: 1. Press the PWR switch (A) to tur ...See also:
Replacement of wiper blades
Grease, wax, insects, or other material on
the windshield or the wiper blade results in
jerky wiper operation and streaking on the
glass. If you cannot remove the streaks
after operating the w ...
Lane Departure Warning (LDW)– introduction
This function is designed to help reduce the
risk of accidents in situations where the vehicle
leaves its lane and there is a risk of driving off
the road or into the opposite lane. LDW consis ...
General warning/information message (amber)
General warning/information message (amber)
Illuminates when a non-critical
warning message or an
information message is available in
the message centre. ...