Subaru Forester: Alarm system
The alarm system helps to protect your vehicle and valuables from theft. The horn sounds and the turn signal lights flash if someone attempts to break into your vehicle. The starter motor is also interrupted to prevent starting the vehicle without a key.
The system can be armed and disarmed with the remote transmitter.
The system does not operate when the key is inserted into the ignition switch.
Your vehicle’s alarm system has been set for activation at the time of shipment from the factory. You can set the system for deactivation yourself or have it done by your SUBARU dealer.
- System operation
- Activating and deactivating the alarm system
- If you have accidentally triggered the alarm system
- Arming the system
- Disarming the system
- Valet mode
- Passive arming
- Tripped sensor identification
- Shock sensors (dealer option)
Deleting old transmitter codes
The control unit of the keyless entry
system has four memory locations to store
transmitter codes, giving it the ability to
operate with up to four transmitters. When
you lose a transmitter, t ...
System operation
The alarm system will give the following
alarms when triggered.
- The vehicle’s horn will sound for 30
seconds.
- The turn signal lights will flash for 30
seconds.
If any of the doors or th ...
See also:
Making A Second Call While Current Call Is In Progress
To make a second call while you are currently on a call,
press the button and say “Dial” or
“Call” followed
by the phone number or phonebook entry you wish to
call. The first call wil ...
Fog Lights — If Equipped
To activate the front fog lights, turn on the parking
lights or the low beam headlights and pull out on
the end of the multifunction lever.
Front Fog Light Control
NOTE: The front fog lights ...
Tyre repair kit
If you are in any doubt
regarding your
ability to carry out the instructions,
contact your Dealer/Approved
Repairer before attempting the repair.
Your vehicle may not be equipped with a spare
...
