Subaru Forester: Airflow mode selection button
Airflow mode selection button
Select the desired airflow mode by pressing the airflow mode selection button. The selected airflow mode is indicated on the display.
Each airflow mode activates the following air outlets.
(Ventilation): Instrument panel outlets
(Bi-level): Instrument panel outlets and the foot outlets
(Heat): Foot outlets, both side outlets of the instrument panel and some through windshield defroster outlets (A small amount of air flows to the windshield and both side windows to prevent fogging.)
Heat-def): Windshield defroster outlets, foot outlets and both side outlets of the instrument panel
NOTE
When the “” mode is
selected, the air
conditioner compressor automatically
operates to more quickly defog the
windshield. At the same time, the air
inlet selection is automatically set to
the “” mode (outside air
mode).
A/C – Air conditioner button
A/C – Air conditioner button If the windshield starts to fog when the climate control system is operated in the AUTO mode, press the air conditioner button “A/C” to defog and dehumidify ...Air inlet selection button
Air inlet selection button Select airflow by pressing the air inlet selection button. The selected air inlet setting is shown on the control panel. (Recirculation): Interior air recirculat ...See also:
Storage
Glove Box Storage Compartment
The glove box storage compartment is located on the
right side of the instrument panel. Pull outward on the
latch to open the storage compartment.
Glove Box Stor ...
Safety Canopy System
WARNING: Do not place
objects or mount equipment
on or near the headliner at the
siderail that may come into
contact with a deploying Safety
Canopy . Failure to follow these
instructions may in ...
Stopping the engine
The ignition switch should be turned off
only when the vehicle is stopped and the
engine is idling.
Do not stop the engine when the
vehicle is moving. This will cause
loss of power to the ...