Jeep Liberty: Air Conditioning Control
Press this button to engage the Air Conditioning. A light will illuminate when the Air Conditioning system is engaged. Rotating the dial left into the blue area of the scale indicates cooler temperatures, while rotating right into the red area indicates warmer temperatures.
NOTE: The air conditioning compressor will not engage until the engine has been running for about 10 seconds.
• MAX A/C
For maximum cooling use the A/C and recirculation buttons at the same time.
• ECONOMY MODE
If economy mode is desired, press the A/C button to turn OFF the indicator light and the A/C compressor. Then, move the temperature control to the desired temperature.
Mode Control (Air Direction)
Rotate this control to choose from several patterns of air distribution. You can select either a primary mode as identified by the symbols on the control, or a blend of two of these modes. ...Automatic Temperature Control (ATC) — If Equipped
Automatic Temperature Control ...See also:
To hook the top tether
1. Remove the headrest at the windowside
seating position where the child
restraint system has been installed with
the lower anchorages or seatbelt; lift up
the headrest while pressing the r ...
Fast-forwarding
Press the “” button continuously
to fastforward
the disc/folder.
Release the button to stop fast-forwarding.
NOTE
If you fast-forward to the end of the last
track/file, fast-forwarding ...
Lower Anchors and Tethers for CHildren System (LATCH)
LATCH label location
Your vehicle is equipped with special anchor
points that are used with the LATCH (Lower
Anchors and Tethers for CHildren) system
compatible child restraints. This system ...