Volvo XC60: Adjusting the set speed
After a speed has been set, it can be increased or decreased by using the or buttons.
1. Press and hold down or until the vehicle reaches the desired speed.
> This will become the set speed when the button is released.
2. Press or for approximately a half second and release the button to increase or decrease vehicle speed by approximately 1 mph (1.6 km/h).
NOTE
• A temporary increase in speed by
pressing the accelerator pedal, for less
than 1 minute (e.g. when passing
another car), does not affect the current
cruise control setting. The vehicle will
automatically return to the previously
set speed when the accelerator pedal is
released.
• If one of the cruise control buttons is
kept depressed for more than approx.
1 minute cruise control is disengaged.
The engine must then be switched off in
order to reset cruise control.
Setting a speed
Use the or buttons set the vehicle's current speed. The set speed is shown in the display. NOTE Cruise control cannot be engaged at speeds below 20 mph (30 km/h). ...Automatic deactivation
Cruise control is automatically deactivated temporarily if one of the following occurs: • If the speed drops below approximately 20 mph (30 km/h). • When the brake pedal is depressed. • I ...See also:
Rear Vision Camera (RVC)
The vehicle may have a Rear Vision Camera (RVC) system. Read this entire section
before using it.
The RVC can assist the driver when backing up by displaying a view of the area
behind the vehicle ...
Fast forward/reverse
Press and hold the buttons to
fast
forward/reverse. This is done at one speed for
audio files but several speeds can be chosen
for video files. Press the buttons
several
times to increas ...
Diagnostics
OnStar Vehicle Diagnostics will perform a vehicle check every month. It will
check the engine, transmission, antilock brakes, and major vehicle systems. It also
checks the tire pressures, if the v ...