Ford Escape: Clear MyKey - MyKey - Locks and Security - Ford Escape Owner's ManualFord Escape: Clear MyKey

To reset all MyKeys as admin keys do the following:

1. Turn the vehicle on using the admin key.
2. Press SETUP until PRESS RESET TO CLEAR MYKEY is displayed.
3. Press and release the RESET button. HOLD RESET TO CONFIRM CLEAR is displayed.
4. Press and hold the RESET button for two seconds until ALL MYKEYS CLEARED is displayed.

    Programming MyKey Optional Settings
    Turn the ignition on using an admin key. To program the optional settings, use the message center buttons to do the following: 1. Press SETUP until RESET FOR MYKEY SETTINGS is displayed. 2. Press ...

    Check MyKey System Status
    The vehicle’s message center system check will provide the status of the following MyKey parameters: • MYKEY MILES — This odometer only tracks mileage when a MyKey is used. If mileage does ...

    See also:

    Checking the engine oil
    Engine oil is essential to the performance and service of the engine. It is suggested that you check the oil level at least once a week in normal use and more often if you are on a trip or drivi ...

    Air conditioner button
    Air conditioner button The button positions and their functions are as follows. ON: The air conditioner operates while the fan is running. Push the button to select this position. The indic ...

    Cleaning the wheels
    WARNING Do not use power washers with circular-jet nozzles (dirt grinders) to clean your vehicle, in particular the tires. You could otherwise damage the tires and cause an accident. ...