GMC Terrain: Using the Outside Mirror with the Blind Spot Mirror
1. Set the main mirror so that the side of the vehicle can just be seen and the blind spot mirror has an unobstructed view.
2. When checking for traffic or before changing a lane, look at the main driver/passenger side mirror to observe traffic in the adjacent lane, behind your vehicle. Check the blind spot mirror for a vehicle in the blind zone. Then, glance over your shoulder to double check before moving slowly into the adjacent lane.
Driving with the Blind Spot Mirror
Actual Mirror View
1. When the approaching vehicle is a long distance away, the image in the main
mirror is small and near the inboard edge of the mirror.
2. As the vehicle gets closer, the imag ...
Park Tilt Mirrors
If the vehicle is equipped with memory mirrors, there is an option to have the
mirrors tilt down, when in R (Reverse), to more easily see the ground near the vehicle.
When the vehicle is shifted to ...
See also:
Correct use of the seat belts
WARNING
USE SEAT BELTS PROPERLY
Seat belts can only work when used properly. Never wear seat belts in any
other way than as described in this section, as that could result in serious
i ...
Storing the current speed or calling up the last stored speed
WARNING
The set speed stored in memory should only be set again if prevailing road conditions
and legal speed limits permit. Possible acceleration or deceleration differences
arising from re ...
Heated Seats
Uplevel Climate Control System Shown, Base Similar
If available, the buttons are near the climate controls. To operate, the ignition
must be in ON/RUN.
Press or
to heat the driver or passenge ...