Mercedes-Benz GLK-Class: Vehicles with automatic transmission
- Apply the parking brake firmly.
- Shift the transmission to position P.
Using the SmartKey
- Turn the SmartKey to position 0 in the ignition lock and remove it. The immobilizer is activated.
The SmartKey can only be removed if the transmission is in position P.
Using KEYLESS-GO
- Press the Start/Stop button (). The engine stops and all the indicator lamps in the instrument cluster go out.
When the driver's door is closed, this corresponds to SmartKey position 1. When the driver's door is open, it corresponds to SmartKey position 0 or "SmartKey removed".
If you attempt to switch off the engine while the selector lever is in a position other than P, a message appears in the multifunction display and you hear a tone.
In an emergency, the engine can be turned off while the vehicle is in motion by pressing and holding the Start/Stop button for three seconds.
Vehicles with manual transmission
Shift to either first gear or reverse gear R. Turn the SmartKey to position 0 in the ignition lock and remove it. The immobilizer is activated. Apply the parking brake firmly. ...Parking brake
WARNING Engaging the parking brake while the vehicle is in motion can cause the rear wheels to lock up. You could lose control of the vehicle and cause an accident. In addition, the vehicle& ...See also:
Cup holders
Take care to avoid spills. Beverages,
if hot, might burn you or your
passengers. Spilled beverages may
also damage upholstery, carpets or
audio equipment. ...
Locking and arming the alarm
CAUTION: No modifications or
additions should be made to the
anti-theft system. Such changes could
cause the system to malfunction.
There are two levels of security:
- Single locking. With all d ...
Advanced settings
Angle
If the DVD supports this function, it is possible
to select a camera angle for a certain scene. This can be done in DVD mode under
DVD root
menu
Advanced settings
Angle.
DivX Vid ...