Toyota RAV4: Using the Bluetooth® audio/phone
1 Bluetooth® connection condition
If “BT” is not displayed, the
Bluetooth® audio/phone
cannot be used.
2 Display
A message, name, number,
etc. is displayed.
Lower-case characters and special characters cannot be displayed.
3 Displays set up menu
4 Selects items such as menu
and number
Turn: Selects an item
Press: Inputs the selected
item
5 Displays information that is too long to be displayed at one time on the display (press and hold)
6 Selects speed dials
7 On-hook switch
Turns the hands-free system
off/ends a call/refuses a
call
8 Off-hook switch
Turns the hands-free system
on/starts a call
■ Microphone
Bluetooth® audio/phone
■ Bluetooth® audio
The Bluetooth® audio system enables you to enjoy music played
on a portable digital audio player (portable player) from the vehicle
speakers via wireless communication.
...
Using the Bluetooth® audio/phone for the first time
Before using the Bluetooth® audio/phone, it is necessary to register a
Bluetooth® device in the system. Follow the procedure below to register
(pair) a device:
1 Press and select “Bluetooth” ...
See also:
Traction control system (TCS)
(If installed)
On slippery road surfaces, the traction control
system (TCS) limits the drive wheels from
spinning excessively, thus helping the car to
accelerate. It also helps to provide suf ...
Recreational towing (behind motorhome, etc.)
Two-Wheel Drive Models
All Four Wheels On The Ground
Recreational towing is allowed ONLY if the driveshaft is
removed. Towing with the rear wheels on the ground
while the driveshaft is connected ...
Introduction
You can establish a Bluetooth® connection to the audio system or to COMAND (see
the separate operating instructions).
WARNING
A driver's attention to the road must always be his/her prim ...
