Honda CR-V: To Remove Exterior Frost or Ice Fromthe Windows

Honda CR-V (2006–2011) Owner's Manual / Features / Vents, Heating, and A/C / To Remove Exterior Frost or Ice Fromthe Windows

1. Select automatically switches to fresh air. The system automatically switches to fresh air mode and turns on the A/C.

The A/C indicator does not come on if it was off to start with.

2. Select 3. Set the fan and temperature.

3. Set the fan and temperature controls to maximum level.

To clear the windows faster, you can close the dashboard corner vents by rotating the wheel below each vent.

This sends more warm air to the windshield defroster vents. Once the windshield is clear, select fresh air mode to avoid fogging the windows.

For your safety, make sure you have a clear view through all the windows before driving.

READ NEXT:

 To Turn Everything Off

Turning the fan speed control dial all the way to the left shuts the system off. Keep the system off for short periods only. To keep stale air and mustiness from collecting, you should have

 Climate Control System

Climate Control System

 Voice Control System

On vehicles with navigation system The climate control system for your vehicle can also be operated using the voice control system. See the navigation system manual for complete details.

SEE MORE:

 Tire Rotation

To help increase tire life and distribute wear more evenly, rotate the tires according to the maintenance messages displayed on the information display.Move the tires to the positions shown in the diagram each time they are rotated. If you purchase directional tires, rotate only fro

 Piston Ring Replacement

1. Remove the piston from the engine block. 2. Using a ring expander (A), remove the old piston rings (B). 3. Clean all ring grooves thoroughly with a squared-off broken ring or ring groove cleaner with a blade to fit the piston grooves. The top and 2nd ring grooves are 1.2 mm (0.05 in.) wide. Th

© 2016-2024 Copyright www.hcrv.net