Subaru Forester: START
The engine is started in this position. The starter cranks the engine to start it. When the key is released (after the engine has started), the key automatically returns to the “ON” position.
Do not turn the ignition switch to the “START” position while the engine is running.
If your registered key fails to start the engine, pull out the key once (the security indicator light will blink), and then insert the key in the ignition switch and turn it to the “START” position and again try to start the engine.
NOTE
The engine may not start in the following
cases:
- The key grip is touching another key or a metallic key holder.
- The key is near another key that contains an immobilizer transponder.
- The key is near or touching another transmitter.
ON
This is the normal operating position after
the engine is started. ...
Key reminder chime
The reminder chime sounds when the
driver’s door is opened and the ignition
switch is in the “LOCK” or “Acc” position.
The chime stops under the following
conditions.
- when the igni ...
See also:
How to use touch screen
- The glass screen on the liquid
crystal display may break if it is hit
with a hard or sharp object. If the
glass breaks, do not touch the liquid
crystalline material, which contains
a s ...
Common Towing Definitions
The following trailer towing related definitions will assist
you in understanding the following information:
Gross Vehicle Weight Rating (GVWR)
The GVWR is the total allowable weight of your vehic ...
Important safety notes
WARNING
When towing a trailer, incorrect equipment and driving style could cause you
to lose control of the vehicle.
Towing incorrectly or not observing this Operator's Manual could lead ...
