Jeep Liberty: Power Door Locks
A power door lock switch is located on each of the front door trim panels. Use this switch to lock or unlock the doors and liftgate.
Power Door Lock Switch Location
1 - Unlock
2 - Lock
If you press the power door LOCK switch while the key is in the ignition, and any front door is open, the power locks will not operate. This prevents you from accidentally locking your keys in the vehicle. Removing the key or closing the door will allow the locks to operate. A chime will sound if the key is in the ignition switch and a door is open, as a reminder to remove the key.
- Automatic Door Locks — If Equipped
- Automatic Unlock Doors On Exit
- Automatic Unlock Doors On Exit Programming
Manual Door Locks
To lock each door, push the door lock knob on each door
trim panel downward. To unlock each door, pull the door
lock knob on each door trim panel upward.
Manual Lock Knob
If the door lock knob ...
Automatic Door Locks — If Equipped
The auto door lock feature default condition is disabled.
When enabled, the door locks will lock automatically
when the vehicle’s speed exceeds 15 mph (24 km/h). The
auto door lock feature can ...
See also:
Climate Control System
Climate Control System ...
Fan speed control dial
The fan operates only when the ignition
switch is turned to the “ON” position. The
fan speed control dial is used to select
four fan speeds. ...
Weight specifications
The gross trailer weight is calculated by adding the weight of the trailer to
the weight of the load and equipment on the trailer. Permissible gross weight: 3500
lbs (1588 kg). The permissible Tra ...
