GMC Terrain: How to Check Lubricant - All-Wheel Drive - Vehicle Checks - Vehicle Care - GMC Terrain Owner's ManualGMC Terrain: How to Check Lubricant

To get an accurate reading, the vehicle should be on a level surface.

To get an accurate reading, the vehicle should be on a level surface.

If the level is below the bottom of the fill plug hole, located on the transfer case, the vehicle will need some lubricant added. Add enough lubricant to raise the level to the bottom of the fill plug hole. A fluid loss could indicate a problem; check and have it repaired, if needed.

What to Use

Refer to Recommended Fluids and Lubricants on page 11‑12 to determine what kind of lubricant to use.

    Transfer Case
    Refer to the Maintenance Schedule to determine how often to check the lubricant and when to change it. See Maintenance Schedule on page 11‑3. ...

    Starter Switch Check
    WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room aroun ...

    See also:

    Deselecting valet mode
    If Valet mode is active when you enter the vehicle, touch the Valet button to view the Valet mode screen. Enter your four digit PIN and touch the OK button. Valet mode is deactivated is displayed ...

    Mute/Un-Mute (Mute OFF)
    When you mute the Uconnectâ„¢ Phone, you will still be able to hear the conversation coming from the other party, but the other party will not be able to hear you. In order to mute the Uconnectâ ...

    Special driving conditions
    Hazardous driving conditions When hazardous driving conditions are encountered such as water, snow, ice, mud, sand, or similar hazards, follow these suggestions: • Drive cautiously and allow ext ...